Split system air conditioning is one of the most common that is used in homes, and for a reason, it is highly recommended. A split system can provide the same effective cooling and heating as the whole-home ducted system, but is much simpler to install and has a lower cost. The guide discusses key advantages of the use of the split system air conditioning and why it is right for a wide variety of home set-ups.
Discussing the merits of a split system air conditioning
Efficient cooling and heating for targeted comfort
Split systems can heat or cool a room or a zone in the house since they condition the air on a room by room basis. This means it provides comfort exactly where it’s needed and isn’t losing energy by conditioning spaces that won’t be used. A split system air conditioner system at home offers the following benefits in terms of efficiency and comfort:
- Inverter technology energy efficiency: Modern inverter split systems vary the speed of the compressor back and forth to keep the set temperature by only using the energy that is needed.
- Independent room control: provides control that is independent so each room can be programmed to a different temperature according to housing requirement during the day.
- Energy star rating selection: Selecting a higher star rated split system can significantly lower energy costs in the year over a lower rated split system of the same capacity.
Cost-effective installation and low upfront outlay
The installation effort and initial cost of a split system are much lower in comparison to ducted air conditioning. A single unit can be installed in a room in just a few hours ideal for renters, apartment dwellers, and people looking to upgrade a single area of their home. Split system air conditioners offer the benefits of low cost and easy installation, such as:
- Lower upfront installation cost: split system generally has a lower upfront system cost, making it easier on the budget of homeowners.
- No ductwork or ceiling modification required: The indoor unit is fitted to the wall and the outdoor unit is installed outside the building and no need for work with ceilings as is required by ducted systems.
- Single-room upgrade flexibility: If you are just stepping up the upgrade you can install one split system at a time, so your homeowner doesn’t have to make the entire commitment to the change to the house.
Improved indoor air quality and health benefits
New split units work much more effectively than just temperature control, they actually filter the air flowing through the inside unit. Home filters are used to regularly clean the air and remove dust, allergens and airborne particles that build up in homes and impact the comfort and health of everyone. Split system home air conditioner advantages to use indoors are:
- Built-in air filtration: Washable filters on a built-in remove dust, pet hair and airborne particles prior to the conditioned air returning to the room.
- Humidity reduction in summer: This cooling process allows any excess damp air to be pulled out of the rooms within the building, so that the humidity level is reduced helping to keep the build up of mold and keep the rooms comfortable.
- Consistent air circulation: Air circulation is continuous ensuring that there is an absence of air pockets or pockets of stagnant air in the unit which can lead to an imbalance in the temperature and create indoor odour problems.
Discussing the frequently asked questions
Does a split system work in the winter to heat the room and in the summer to cool the room?
Yes. Reverse-cycle split systems not only cool and heat, they help you close your year by keeping any room climate-ready, throughout the year.
How long does split system installation take?
A qualified technician will be able to install most one-unit products in two to four hours.
Can a split system be put in an apartment?
Yes. In apartments, a split system is ideal because of its simplicity in installation and the fact that it will condition a particular room without the need for ductwork.
